Our 150A stainless steel high pressure misting kit comes with model 150A pump and all of the piping, nozzles, fittings, and accessories you will need to install selected misting line length in "I" and "L" shapes. Please check "In The Box" section to verify you have the necessary fittings for your installation. Stainless steel piping ensures very durable and aesthetically pleasing solution. Model 150A pump is our most versatile high pressure misting pump featuring:
Three self-priming pistons
Interval mode misting control with both mist and pause cycles in 1secincrements
0.4 Gallons Per Minute (GPM) capacity
Integrated water supply sensor, pressure adjustment valve and pressure gauge
Anti-drip HP solenoid valve
Motor overheat protection
GFCI safety power cord
Its ceramic-coated stainless steel pistons and aircraft anodized aluminum body make it the most long-lasting misting machine on the market with minimal maintenance requirements. Controlled wirelessly via mobile iOS and Android app. Available with both ceramic (last longer but sensitive to freezing) and stainless steel (less sensitive to freezing but shorter lifespan) nozzle orifice type.
Power: 120VAC 60Hz 180W
Maximum Flow: 0.4GPM
Minimum Flow: 0.18GPM
Operating temperature: 40°F to 130°F
Storage temperature: 34°F to 130°F
Dimensions: 16.5" (L) X 8" (W) X 9" (H)
Maximum pressure: 1000PSI
Oil capacity: 80mL
3/4 inch garden hose connection
Max / Min nozzles at full pressure
orifice size diameter
Misting pumpmust be installed at or above grade level, and away from direct sunlight and rain exposure. It must not be submerged in water for any period of time.
Water inlet can be fed with water from the city water line (requires 3/4 garden hose male connection) or gravity fed with water from a bucket. Potable water only. Included polyether tubing should be used to connect pump to the faucet directly as garden hoses often react with chlorine in water and cause chlorine smell in misted air. Integrated water switch will shut off pump when there is no water present.
Power:Outdoor rated 120V NEMA 5-15R GFCI power outlet is required.
Pump oil must be added before powering ON for the first time.
Requires simple oil change every 300-500 hours, or once a year.
May require water, o-ring, and oil seal change after 1500-2000hrs (2000hrs translates to 7 years of moderate use or 3 years of very heavy use)
Filter change (if optional 0.5 micron filter is used) based on filter specifications. Filter cleaning if standard (included) filter is used is recommended at least once a season.
In The Box
Model 150A pump with basic accessories:
Syringe for dispensing oil
15ft high pressure plastic tube (black color) for connecting pump outlet to the misting line
8.5ft 12mm polyether tubing with female garden hose adapter for connecting water source to filter inlet
5ft 10mm polyether tubing with quick connect for connecting filter outlet to pump water inlet
Standard stainless steel mesh filter with holder
Quick connect to 1/4 inch slip lock adapter for connecting pump outlet to high pressure line
Spare o-ring seals
High pressure misting nozzles (size, number, and orifice material according to selection)
Stainless steel 24 inch pipe (same number as the number of nozzles selected)
Rubberized pipe hangers (number of nozzles selected + 10pcs)
Straight slip lock fitting with nozzle port (same number as the number of nozzles selected + 1)
Straight slip lock fitting without nozzle port QTY 1