Back to products

aerMist 050SA

$899.00Google review image

Ideal for spaces up to 400 sqft. Model 050SA is our quietest high pressure misting pump. 

Free delivery icon

Free deliveryOn orders over $150.

3 year pump warranty icon

3 year pump warrantyEnjoy 3 years of worry-free coverage at no extra cost.

SKU: AM-050SA-000

Availability: In Stock

Categories: High Pressure Misting Pump

  • Overview
  • Specifications
  • Installation
  • Maintenance
  • In The Box

Ideal for spaces up to 400 sqft.

Model 050SA pump is our quietest high pressure misting pump featuring:

  • 3 year pump warranty
  • Three self-priming pistons
  • Interval mode misting with 4 settings: non-stop, mist 3sec – pause 10sec, mist 10sec – pause 10sec, mist 20sec – pause 10sec
  • User selectable pressure output: 580PSI, 800PSI, & 1000PSI
  • 0.18 Gallons Per Minute (GPM) capacity
  • Integrated water supply sensor and automatic pressure regulation
  • Anti-drip HP solenoid valve
  • 12V 150W brushless DC servo motor with motor overheat protection
  • Outdoor rated 12VDC power supply

Its ceramic-coated stainless steel pistons and aircraft anodized aluminum body make it the most long-lasting misting machine on the market with minimal maintenance requirements. Automatic pressure regulation allows it to operate with just 1 or 2 nozzles connected.

Perfect for smaller spaces and for adding misting to a fan. Comes with a wireless remote.

If your water has scale-causing minerals such as calcium, magnesium, and iron (defined as “hard water”), or fine sediment, consider upgrading to a water filter + scale inhibitor to prevent premature pump failure. Damage from scale and fine sediment is not covered under the warranty.

Specifications
Power:120VAC 60Hz 150W
Maximum Flow:0.18GPM
Minimum Flow:0.05GPM
Pressure:580, 800, and 1000PSI user selectable
Interval mode misting with 4 settings:non-stop, mist 3sec - pause 10sec, mist 10sec - pause 10sec, mist 20sec - pause 10sec
Dimensions15in (L) x 8in (W) x 8in (H)
Pump operating temperature:40°F to 130°F
Pump storage temperature:34°F to 130°F
Noise:48dB
Water connection:3/4 inch garden hose thread
Wireless range:up to 100ft in open space
Remote battery:2 x CR2016

Max / Min nozzles at full pressure

orifice size diametermin nozzlesmax nozzles
0.1mm (0.004 inch)723
0.15mm (0.006 inch)515
0.2mm (0.008 inch)410
0.3mm (0.012 inch)NANA

Installation requirements

Proper installation is crucial for optimal performance and longevity of your misting pump. Please follow these key guidelines to ensure safe and efficient operation:

  • Misting pump must be installed at or above grade level, and away from direct sunlight and rain exposure. It must not be submerged in water for any period of time.
  • Water inlet can be fed with water from the city water line (requires 3/4 garden hose male connection) or gravity fed with water from a bucket. Potable water only. Included polyether tubing should be used to connect the pump to the faucet directly as garden hoses often react with chlorine in water and cause a chlorine smell in misted air. The integrated water switch will shut off the pump when there is no water present.
  • Power: Outdoor rated 120V NEMA 5-15R GFCI power outlet is required.
  • Pump oil must be added before powering ON for the first time.

Regular maintenance is essential to ensure reliable operation and extend the lifespan of your misting pump. Follow these maintenance guidelines to keep the system in optimal condition:

  • Requires simple oil change every 1000 hours, or once a year.
  • Requires winterization for areas where temperatures drop below freezing. Water must be drained from all tubing and filters, pump and ceramic nozzles removed, and stored at above-freezing temperatures.
  • May require water, o-ring, and oil seal change after 1000-2000hrs (2000hrs translates to 7 years of moderate use or 3 years of very heavy use)
  • Filter change (if optional 0.5 micron filter is used) based on filter specifications. Filter cleaning if a standard (included) filter is used is recommended at least once a season.

Model 050SA pump with basic accessories:

  • Pump oil

  • Syringe for dispensing oil

  • 15ft 1/4 inch high pressure plastic tube (black color) for connecting pump outlet to the misting line

  • Standard stainless steel mesh filter with polyether tubing and quick connect adapter for direct connection to pump inlet

  • Quick connect to 1/4 inch slip lock adapter for connecting pump outlet to high pressure line

  • Plastic tubing cutters

  • Wireless (key fob) remote

Start Cooling Your Space Today

Don’t let the heat keep you indoors. With aerMist, you can enjoy your outdoor spaces all summer long.

Bottom action tile icon

Secure Payment options

Your payment is protected with industry standard encription.

Bottom action tile icon

Free & Fast Delivery

On orders over $150.

Bottom action tile icon

Customer Help Centre

Expect advice and support from our customer service team.