050SA Stainless Steel Misting Kit

Overview
Specifications
Installation
Maintenance
In The Box

Ideal for smaller spaces, up to 400 sqft.

Our quietest misting system, perfect for spaces up to 400 sqft.

The 050SA high-pressure misting kit includes the 050SA pump along with all the piping, nozzles, fittings, and accessories required to install your chosen misting line length in a straight “I” configuration. Please check the “In The Box” section to verify you have the necessary fittings for your installation. You can choose stainless steel piping or plastic piping.

Model 050SA pump is our quietest high pressure misting pump featuring:

3 year pump warranty
Three self-priming pistons
Interval mode misting with 4 settings: non-stop, mist 3sec – pause 10sec, mist 10sec – pause 10sec, mist 20sec – pause 10sec
User selectable pressure output: 580PSI, 800PSI, & 1000PSI
0.18 Gallons Per Minute (GPM) capacity
Integrated water supply sensor and automatic pressure regulation
Anti-drip HP solenoid valve
12V 150W brushless DC servo motor with motor overheat protection
Outdoor rated 12VDC power supply

For your convenience, we offer installation service in the greater DFW area with additional metro areas coming soon.
Its ceramic-coated stainless steel pistons and aircraft anodized aluminum body make it the most long-lasting misting machine on the market with minimal maintenance requirements. Automatic pressure regulation allow it to operate with just 1 or 2 nozzles connected.

Perfect for smaller spaces and for adding misting to a fan. Comes with a wireless remote.

Available with both ceramic and stainless steel nozzle orifice types. A stainless steel orifice is more resistant to mild freezing temperatures but has a somewhat shorter life. A ceramic orifice has a longer life but will crack when exposed to temperatures below freezing point if there is any water left in it.

Draining water from misting lines will not remove water from the nozzle, so if you live in areas where temperatures drop below freezing even for short periods, use stainless steel orifice nozzles. If your water has scale-causing minerals such as calcium, magnesium, and iron (defined as “hard water”), or fine sediment, consider upgrading to a water filter + scale inhibitor to prevent premature pump failure, and clogged and dripping nozzles caused by scale buildup. Damage from scale and fine sediment is not covered under the warranty.

Specs

Specifications
Power:	120VAC 60Hz 150W
Maximum Flow:	0.18GPM
Minimum Flow:	0.05GPM
Pressure:	580, 800, and 1000PSI user selectable
Interval mode misting with 4 settings:	non-stop, mist 3sec - pause 10sec, mist 10sec - pause 10sec, mist 20sec - pause 10sec
Dimensions	15in (L) x 8in (W) x 8in (H)
Pump operating temperature:	40°F to 130°F
Pump storage temperature:	34°F to 130°F
Noise:	48dB
Water connection:	3/4 inch garden hose thread
Wireless range:	up to 100ft in open space
Remote battery:	2 x CR2016
Misting nozzle wet storage temperature:	Ceramic orifice: 33°F to 140°F / Stainless steel orifice: 22°F to 140°F

Max / Min nozzles at full pressure

orifice size diameter	min nozzles	max nozzles
0.1mm (0.004 inch)	7	23
0.15mm (0.006 inch)	5	15
0.2mm (0.008 inch)	4	10
0.3mm (0.012 inch)	NA	NA

Installation requirements

Proper installation is crucial for optimal performance and longevity of your misting pump. Please follow these key guidelines to ensure safe and efficient operation:

Misting pump must be installed at or above grade level, and away from direct sunlight and rain exposure. It must not be submerged in water for any period of time.
Water inlet can be fed with water from the city water line (requires 3/4 garden hose male connection) or gravity fed with water from a bucket. Potable water only. Included polyether tubing should be used to connect the pump to the faucet directly as garden hoses often react with chlorine in water and cause a chlorine smell in misted air. The integrated water switch will shut off the pump when there is no water present.
Power: Outdoor rated 120V NEMA 5-15R GFCI power outlet is required.
Pump oil must be added before powering ON for the first time.

Regular maintenance is essential to ensure reliable operation and extend the lifespan of your misting kit. Follow these maintenance guidelines to keep the system in optimal condition:

Requires simple oil change every 1000 hours, or once a year.
Requires winterization for areas where temperatures drop below freezing. Water must be drained from all tubing and filters, pump and ceramic nozzles removed, and stored at above-freezing temperatures.
May require water, o-ring, and oil seal change after 1000-2000hrs (2000hrs translates to 7 years of moderate use or 3 years of very heavy use)
Filter change (if optional 0.5 micron filter is used) based on filter specifications. Filter cleaning if a standard (included) filter is used is recommended at least once a season.

Model 050SA pump with basic accessories:

Pump oil
Syringe for dispensing oil
15ft high pressure plastic tube (black color) for connecting pump outlet to the misting line
Standard stainless steel mesh filter with polyether tubing and quick connect adapter for direct connection to pump inlet
Quick connect to 1/4 inch slip lock adapter for connecting pump outlet to high pressure line
Wireless (key fob) remote