Search our shop

Water Filter + Scale Inhibitor

For Pump Model

Complete water filter with #10 housing, integrated mounting bracket and pressure release, carbon activated 0.5 micron rated filter insert, phosphate center core cartridge insert for inhibiting scale and corrosion, and slip lock connectors. Carbon activated filter reduces chlorine and other odors from drinking water and 0.5 micron rated mechanical filter helps reduce clogged and dripping nozzles due to super fine sediment buildup. Phosphate cartridge contains food grade hexametaphosphate slow dissolve crystals that inhibit scale and rust build up, thus preventing clogged and dripping nozzles caused by scale. Replace carbon filter insert once run hours are exceeded or at the start of a new season, whichever comes first. Replace phosphate center core insert once there is no more crystals left. Easy install with slip lock connectors. Phosphate cartridge installs in the center core of the carbon filter facing up. Remove plastic wrapping from carbon filter insert prior to use. For use with model 050SA and 150A pumps, please select correct version of the filter for your pump.


  • Carbon Filter Insert: Carbon block with 0.5 micron rating
  • Phosphate Center Core Insert: Slow release, food grade hexametaphosphate
  • Tubing Size In: 12mm for model 150A and 8mm for 050SA
  • Tubing Size Out: 10mm for model 150A and 8mm for 050SA
  • Operating Temperature: 40 °F to 100 °F
  • Carbon Filter Insert Capacity: 20,000 gallons (800-1,750 hours for 150A and over 1,750 hours for 050SA)
  • Phosphate Center Core Insert Life: Up to 6 months
  • Filter Housing Dimensions: 5.38 inch diameter x 13.75 inch height
  • Flow Rate: 1-1.5 gallons per minute
  • Water Hardness: Up to 15 grains per gallon (256 ppm)


  • Carbon filter insert
  • Polyphosphate center core insert
  • 3/8 NPT to 12mm slip lock adapter (for model 150A pump)
  • 3/8 NPT to 10mm slip lock adapter (for model 150A pump)
  • 3/8 NPT to 8mm slip lock adapter QTY2 (for model 050SA pump)
  • #10 filter housing with integrated mounting bracket
  • O ring


  • Not recommended for flow rates exceeding 1.5 GPM
  • WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
  • CAUTION: Eye irritant. Contains sodium calcium hexametaphosphate. Avoid contact with eyes. In case of eye contact, flush with water for 15 minutes, seek medical attention. Keep out of reach of children.